Palfinger - Hydraulic Reachforks

SG454 Reachforks for oneside unloading		Forward Reach Palfinger reachforks have an outer sleeve which is hydraulically extended to increase the overall length of the fork. Operated by a lever, the forks can be extended outwards until at the required reach, the load is lifted before the forks are retracted back to the original length. The F3 203 and F3 253 PX combined with the SG454 forks provide a ideal oneside unloading solution Applications

Palfinger reachforks work perfectly with pallets		Reachforks suit most applications and are the most the commonly used TMF reach system, ideally suited for loads carried on pallets. NB In some very specific applications (e.g. special stillages or palletless brick pack handling) the reachfork outer dimensions can be too large, in this instance the GTS or CR models should be considered. Check the reachfork specification sheet or contact us Hydraulically extending reachforks are commonly used on the Palfinger F3 PX series and can also be fitted to the F3 GTS and CR models to provide additional reach.

Reachfork Dimensions Section size - Commonly the reachfork section is 161mmx57mm Length - Variable closed lengths are available with longer closed lengths also offering more extended reach. For example the SG454 is 1600mm long and can extend 1200mm giving an extended total length of 2800mm Palfinger reachforks are available in different capacities and sizes